TESCON PRIMER RP 1L

TESCON® PRIMER RP is applied to porous substrates to prepare the surface for optimum adhesion of TESCON® VANA, TESCON® PROFIL, TESCON EXTORA®, TESCON EXTORA® PROFIL & TESCON EXTOSEAL®. Use TESCON® PRIMER RP to prime substrates such as timber flooring, masonry, fibre cement, plywood, oriented strand board (OSB), and other porous or friable surfaces prior to application of pro clima tapes. This product is designed to enhance adhesion to porous substrates and allow for a highly durable airtight seal and is suitable for bonding all pro clima tape products to any porous or friable building material.

Applications

Substrate primer for porous, dusty and difficult surfaces. On masonry, concrete, fibre cement, blockwork or dusty timber, tape adhesion is unreliable without it. Priming takes minutes and removes the most common cause of tape failure. Roll or brush applied, allow to dry before taping.

Specifications

1L | Roller or brush applied | For porous and dusty substrates

Technical Documentation

Full specifications, certifications, warranties and declarations of performance are maintained by Pro Clima Australia.

Pro Clima Australia technical resources

Where to Buy

Pro Clima products are available through stockists across New South Wales and South East Queensland.

Find a Stockist

Retailers: Become a Stockist